OpenMV Cam H7 R2

We are no longer producing this version of the OpenMV Cam, however, we can still build it for custom bulk orders. Please email us if you wish to place a production order at openmv@openmv.io We'll keep the product webpage up for documentation purposes.

See our successor to the OpenMV Cam H7 R2, the OpenMV Cam N6 here.

The OpenMV Cam is a small, low power, microcontroller board which allows you to easily implement...

We are no longer producing this version of the OpenMV Cam, however, we can still build it for custom bulk orders. Please email us if you wish to place a production order at openmv@openmv.io We'll keep the product webpage up for documentation purposes.

See our successor to the OpenMV Cam H7 R2, the OpenMV Cam N6 here.

The OpenMV Cam is a small, low power, microcontroller board which allows you to easily implement applications using machine vision in the real-world. You program the OpenMV Cam in high level Python scripts (courtesy of the MicroPython Operating System) instead of C/C++. This makes it easier to deal with the complex outputs of machine vision algorithms and working with high level data structures. But, you still have total control over your OpenMV Cam and its I/O pins in Python. You can easily trigger taking pictures and video on external events or execute machine vision algorithms to figure out how to control your I/O pins.

The OpenMV Cam features:

• The STM32H743VI ARM Cortex M7 processor running at 480 MHz with 1MB SRAM and 2MB of flash. All I/O pins output 3.3V and are 5V tolerant. The processor has the following I/O interfaces:
• A full speed USB (12Mbs) interface to your computer. Your OpenMV Cam will appear as a Virtual COM Port and a USB Flash Drive when plugged in.
• A μSD Card socket capable of 100Mbs reads/writes which allows your OpenMV Cam to take pictures and easily pull machine vision assets off of the μSD card.
• A SPI bus that can run up to 80Mbs allowing you to easily stream image data off the system to either the LCD Shield, the WiFi Shield, or another microcontroller.
• An I2C Bus (up to 1Mb/s), CAN Bus (up to 1Mb/s), and an Asynchronous Serial Bus (TX/RX, up to 7.5Mb/s) for interfacing with other microcontrollers and sensors.
• A 12-bit ADC and a 12-bit DAC.
• Three I/O pins for servo control.
• Interrupts and PWM on all I/O pins (there are 10 I/O pins on the board).
• And, an RGB LED and two high power 850nm IR LEDs.
• A removable camera module system, with support for 8-bit parallel, allowing the OpenMV Cam H7 to interface with different sensors:
• The OpenMV Cam H7 comes with a MT9M114 image sensor is capable of taking 640x480 8-bit Grayscale images or 640x480 8-bit BAYER images at 40 FPS when the resolution is above 320x240 and 80 FPS when it is below. Most simple algorithms will run between 40-80 FPS on QVGA (320x240) resolutions and below. Your image sensor comes with a 2.1mm lens on a standard M12 lens mount. If you want to use more specialized lenses with your image sensor you can easily buy and attach them yourself.
• Or you can use one of the many sensor modules in our sensor portfolio.
  
• A LiPo battery connector compatible with 3.7V LiPo batteries commonly sold online for hobbyist robotic applications.

For more information, see our documentation.