{"title":"OpenMV-AE3-US","description":"\u003cp\u003e\u0026lt;products_qty\u0026gt;openmv-ae3-80.00-reward-1x\u0026lt;\/products_qty\u0026gt;\u003c\/p\u003e","products":[{"product_id":"servo-shield-v2","title":"Servo Shield","description":"\u003cp style=\"text-align: justify;\"\u003eThe Servo Shield allows your OpenMV Cam to directly control up to 4 standard hobby servos via P7\/P8\/P9\/P10. Each output is buffered and boosted to 0-5V. If you don't need an output it can be disconnected via a solder-bridge jumper too.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe shield features a wide voltage range 6-36V input, which is robust to reverse voltage and features robust transient surge protection. Use this input to power your OpenMV Cam from 12\/24V power supplies without having to worry about damaging your camera. The wide range voltage supply outputs 5.6V on VIN via an ideal OR'ing diode so that you can power your OpenMV Cam from multiple shields with OR'ing diodes (e.g. all of our dual header column shields).\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe wide voltage range regulator onboard is also capable of powering the 4 standard hobby servos, as it can provide up to 5A for the servos in addition to powering the OpenMV Cam.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe shield also features a robust 0-5V ADC input (AIN) that outputs 0-3.3V to your OpenMV Cam on P6. The input is robust to reverse voltage and features overvoltage protection (tested up to +\/-36V). By shorting a solder bridge jumper on the board, which supplies a 240 ohm load on the input, you can work in 4-20mA mode. If you don't need the ADC input, you can disconnect it from P6, too.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eFinally, the shield features a robust 0-5V digital input\/output. The P10 Servo header Pin is tolerant to reverse voltage (tested with -12V), shorting to ground, and shorting to 12V. By default, the P10 Servo Header Pin acts as a digital input driving P10 in Open-Drain Mode so that you can support input triggering from multiple sources, all driving P10. Alternatively, you can switch P10 Servo Header Pin to be a digital output driving 0-5V for triggering devices from your OpenMV Cam instead of being triggered by them. So, whatever your use case is for triggering, the shield accommodates. If you don't need the trigger input\/output, you can disconnect it from P10, too.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe V3 version of the servo shield updates all I\/O pins (P7\/P8\/P9\/P10) to be bidirectional (from being unidirectional) with 3.3V to 5V level shifting. The V3 version also uses lower-profile components, higher-temperature-rated caps, and powers the camera through an ideal diode to reduce heat loss.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis shield is compatible with all OpenMV Cam models.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/docs.openmv.io\/openmvcam\/shields\/servo-shield.html\" title=\"Documentation\" rel=\"noopener\" target=\"_blank\"\u003eFor more information, see our documentation.\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"OpenMV","offers":[{"title":"V2","offer_id":42359308550238,"sku":"OMV-SHIELD-SERVO-V2","price":35.0,"currency_code":"USD","in_stock":false},{"title":"V3","offer_id":42359308517470,"sku":"OMV-SHIELD-SERVO-V3","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0803\/9211\/files\/servo-shield-v3-hero-cam.jpg?v=1767837028"},{"product_id":"openmv-ae3","title":"OpenMV AE3","description":"\u003cp style=\"text-align: justify;\"\u003eThe OpenMV AE3 is a small, low power, microcontroller board which allows you to easily implement applications using machine vision in the real-world. You program the OpenMV AE3 in high level Python scripts (courtesy of the \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"http:\/\/micropython.org\/\" title=\"MicroPython\" target=\"_blank\"\u003eMicroPython\u003c\/a\u003e\u003c\/span\u003e Operating System) instead of C\/C++. This makes it easier to deal with the complex outputs of machine vision algorithms and working with high level data structures. But, you still have total control over your OpenMV AE3 and its I\/O pins in Python. You can easily trigger taking pictures and video on external events or execute machine vision algorithms to figure out how to control your I\/O pins.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe OpenMV AE3 is our small powerhouse and features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: justify;\"\u003eThe \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"Ensemble E3 Series\" href=\"https:\/\/alifsemi.com\/ensemble-e3-series\/\" target=\"_blank\"\u003eAlif Ensemble E3\u003c\/a\u003e\u003c\/span\u003e Dual ARM Cortex-M55 vector accelerated processors capable of up to 8 operations per clock running at 400 MHz (3.2 gigaops) and 160 MHz (1.28 gigaops) with 13.5MB of SRAM, 5.5MB of onchip MRAM (new type of FLASH) for program execution, and 32 MB of storage FLASH. The processor features dual 400 MHz and 160 MHz NPUs offering \u003cstrong\u003e204 Gigaops and 46 Gigaops of AI\/ML compute for running models - allowing you to run YOLO object detection algorithms onboard at 30 FPS and perform sentence recognition (for example) at the same time\u003c\/strong\u003e, and GPU for graphics acceleration that can accelerate image scaling. All I\/O pins output 3.3V and are 3.3V tolerant. The processor has the following I\/O interfaces:\n\u003cul\u003e\n\u003cli\u003eA 120 FPS 1MP Color Global Shutter image sensor. Most simple algorithms will run about 60 FPS on VGA (640x480) resolutions and below. If you want to use more specialized lenses with your image sensor, you can easily buy and attach them yourself. \u003c\/li\u003e\n\u003cli\u003eA high speed USB-C (480Mbs) interface to your computer. Your OpenMV Cam will appear as a Virtual COM Port and a USB Flash Drive when plugged in.\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eWith EMI Filtering and TVS protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eA SPI buses that can run up to 50Mb\/s allowing you to easily stream image data off the system to either the LCD Shield or another microcontroller.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo I2C Buses (up to 1Mb\/s), an I3C Bus (up to 10 Mb\/s), a CAN Bus (up to 8Mb\/s), and four Asynchronous Serial Buses (TX\/RX) for interfacing with other microcontrollers and sensors.\u003c\/li\u003e\n\u003cli\u003eTwo 12-bit ADCs (1.8V Tolerant).\u003c\/li\u003e\n\u003cli\u003eInterrupts on all I\/O pins (there are 10 I\/O pins on the board).\u003c\/li\u003e\n\u003cli\u003eAn onboard RTC that keeps running when the system is in low-power mode.\n\u003cul\u003e\n\u003cli\u003eWith 4KB of Backup RAM.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eA user controllable\/dimmable RGB LED.\u003c\/li\u003e\n\u003cli\u003eA user button.\u003c\/li\u003e\n\u003cli\u003eQWIIC Connector for easy electronic integration.\u003c\/li\u003e\n\u003cli\u003eA B2B Header for easy electronic integration.\u003c\/li\u003e\n\u003cli\u003e32 MB of program\/storage octal flash clocked at 100 MHz in 8-bit\u003cspan\u003e D\u003c\/span\u003eDR mode for 200\u003cspan\u003e \u003c\/span\u003eMB\/s of bandwidth (read speed).\u003c\/li\u003e\n\u003cli\u003eAn IMU (Accelerometer and Gyroscope) centered underneath the camera module.\u003c\/li\u003e\n\u003cli\u003eA Mic for recording audio and sound detection\/processing.\u003c\/li\u003e\n\u003cli\u003eA 8x8 Time-of-flight (ToF) sensor capable of detecting objects up to 4 meters away.\u003c\/li\u003e\n\u003cli\u003eOnboard WiFi (a\/b\/g\/n - 11\/54\/65 Mb\/s) and Bluetooth (v5.1 - BR\/EDR\/BLE) module with a chip antenna.\n\u003cul\u003e\n\u003cli\u003eOption to use a U.FL antenna instead.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eA 6-pin SWD Edge Connect Header Compatible with SEGGER J-Link Devices for debugging and programming.\n\u003cul\u003e\n\u003cli style=\"text-align: justify;\"\u003eWith EMI Filtering and TVS protection.\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eRecovery switch for debugging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eFour M1.6 mounting holes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/docs.openmv.io\/openmvcam\/quickref\/openmv-ae3.html\" title=\"Documentation\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eFor more information, see our documentation.\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Kickstarter","offers":[{"title":"Default Title","offer_id":41573384388702,"sku":"OMV-AE3-V1","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0803\/9211\/files\/ae3-hero-v6.jpg?v=1767845205"},{"product_id":"openmv-n6","title":"OpenMV N6","description":"\u003cp style=\"text-align: justify;\"\u003eThe OpenMV Cam headers do not come pre-soldered.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe OpenMV N6 is a small, low power, microcontroller board which allows you to easily implement applications using machine vision in the real-world. You program the OpenMV N6 in high level Python scripts (courtesy of the \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"MicroPython\" href=\"http:\/\/micropython.org\/\" target=\"_blank\"\u003eMicroPython\u003c\/a\u003e\u003c\/span\u003e Operating System) instead of C\/C++. This makes it easier to deal with the complex outputs of machine vision algorithms and working with high level data structures. But, you still have total control over your OpenMV N6 and its I\/O pins in Python. You can easily trigger taking pictures and video on external events or execute machine vision algorithms to figure out how to control your I\/O pins.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe OpenMV N6 features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: justify;\"\u003eThe \u003ca href=\"https:\/\/www.st.com\/en\/microcontrollers-microprocessors\/stm32n6-series.html\" title=\"STM32N6\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSTM32N6\u003c\/span\u003e\u003c\/a\u003e ARM Cortex-M55 vector accelerated processor capable of up to 8 operations per clock running at 800 MHz (6.4 gigaops) with 64MBs SDRAM + 4.2MB of SRAM and 32 MB of program\/storage FLASH. The processor features a 1 GHz NPU offering \u003cstrong\u003e600 Gigaops of AI\/ML compute for running models - allowing you to run YOLO object detection algorithms onboard at 30 FPS\u003c\/strong\u003e, an Image Signal Processor capable of handling up to 5MP RAW BAYER Camera Modules, GPU for graphics acceleration that can accelerate image scaling and 3D image rotation, and onboard \u003cstrong\u003eH.264 Encode (up to 1080p)\u003c\/strong\u003e and JPEG Encode\/Decode support hardware acceleration. All I\/O pins output 3.3V and are 3.3V tolerant. The processor has the following I\/O interfaces:\n\u003cul\u003e\n\u003cli\u003eA high speed USB-C (480Mbs) interface to your computer. Your OpenMV Cam will appear as a Virtual COM Port and a USB Flash Drive when plugged in.\n\u003cul\u003e\n\u003cli\u003e1.5A current limited.\u003c\/li\u003e\n\u003cli\u003eWith EMI Filtering and TVS protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eA μSD Card socket capable of 104MB\/s reads\/writes which allows your OpenMV Cam to take pictures and \u003cspan\u003eeasily\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003epull machine vision assets off of the μSD card.\n\u003cul\u003e\n\u003cli\u003eWith EMI Filtering and TVS protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo SPI buses that can run up to 100Mb\/s allowing you to easily stream image data off the system to either the LCD Shield or another microcontroller.\n\u003cul\u003e\n\u003cli\u003eAnd one I2S Bus for an audio CODEC.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAn I2C Bus (up to 1Mb\/s), an I3C Bus (up to 10 Mb\/s), two CAN Buses (up to 8Mb\/s), and three Asynchronous Serial Buses (TX\/RX, up to 12.5Mb\/s) for interfacing with other microcontrollers and sensors.\u003c\/li\u003e\n\u003cli\u003eA 12-bit ADC (3.3V Tolerant).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThree I\/O pins for servo control.\u003c\/li\u003e\n\u003cli\u003eOne I\/O pin for frame sync\/triggering (or servo control).\u003c\/li\u003e\n\u003cli\u003eTwo I\/O pins for low power wakeup.\n\u003cul\u003e\n\u003cli\u003eOne shared with a button.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInterrupts on all I\/O pins (there are 18 I\/O pins on the board).\u003c\/li\u003e\n\u003cli\u003eAn onboard RTC that keeps running when the system is in low-power mode.\n\u003cul\u003e\n\u003cli\u003eWith 8KB of Backup RAM. \u003c\/li\u003e\n\u003cli\u003eWith a dedicated backup battery connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eA user controllable\/dimmable RGB LED.\u003c\/li\u003e\n\u003cli\u003eA user button.\u003c\/li\u003e\n\u003cli\u003eAnother RGB LED for Charging, USB Power, VIN Power indication.\u003c\/li\u003e\n\u003cli\u003e64 MB of external 16-bit SDRAM clocked at 200 MHz DDR for 800 MB\/s of bandwidth.\u003c\/li\u003e\n\u003cli\u003e32 MB of program\/storage octal flash clocked at 200 MHz in 8-bit\u003cspan\u003e D\u003c\/span\u003eDR mode for 400\u003cspan\u003e \u003c\/span\u003eMB\/s of bandwidth (read speed).\u003c\/li\u003e\n\u003cli\u003eAn IMU (Accelerometer and Gyroscope) centered underneath the camera module.\u003c\/li\u003e\n\u003cli\u003eA Mic for recording audio and sound detection\/processing.\u003c\/li\u003e\n\u003cli\u003eOnboard WiFi (a\/b\/g\/n - 11\/54\/65 Mb\/s) and Bluetooth (v5.1 - BR\/EDR\/BLE) module with a chip antenna.\n\u003cul\u003e\n\u003cli\u003eOption to use a U.FL antenna instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOnboard 10\/100\/1000 Mb\/s Ethernet\n\u003cul\u003e\n\u003cli\u003eEthernet Jack with PoE support via an external shield.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eA removable camera module system, with support for MIPI CSI and 8-bit parallel, allowing the OpenMV N6 to interface with different sensors:\n\u003cul\u003e\n\u003cli style=\"text-align: justify;\"\u003eThe OpenMV N6 comes with a 120 FPS 1MP Color Global Shutter image sensor. Most simple algorithms will run about 120 FPS on VGA (640x480) resolutions and below. If you want to use more specialized lenses with your image sensor, you can easily buy and attach them yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca rel=\"noopener\" title=\"Camera Sensor Modules\" href=\"https:\/\/openmv.io\/collections\/openmv-cam-camera-modules\" target=\"_blank\"\u003eOr you can use one of the many sensor modules in our sensor portfolio.\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eA LiPo battery connector compatible with 3.7V LiPo batteries commonly sold online for hobbyist robotic applications with battery charging support via USB.\n\u003cul\u003e\n\u003cli\u003e500 mA Fast Charge Current\u003c\/li\u003e\n\u003cli\u003eWith TVS Protection.\u003c\/li\u003e\n\u003cli\u003eWith ADC for reading the battery voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAn ARM 10-pin JTAG Header Compatible with SEGGER J-Link Devices for debugging and programming.\n\u003cul\u003e\n\u003cli style=\"text-align: justify;\"\u003eWith EMI Filtering and TVS protection.\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eBOOT1 switch for debugging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eExternal 5V VIN with reverse supply protection.\n\u003cul\u003e\n\u003cli\u003eWith TVS Protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca rel=\"noopener noreferrer\" title=\"Documentation\" href=\"https:\/\/docs.openmv.io\/openmvcam\/quickref\/openmv-n6.html\" target=\"_blank\"\u003eFor more information, see our documentation.\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Kickstarter","offers":[{"title":"Default Title","offer_id":41573456576606,"sku":"OMV-N6-V1","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0803\/9211\/files\/n6-hero-v6.jpg?v=1767841451"},{"product_id":"multispectral-thermal-camera-module","title":"Multispectral Thermal Camera Module","description":"\u003cp style=\"text-align: justify;\"\u003eThe PAG7936 module is only compatible with the \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca rel=\"noopener\" title=\"OpenMV N6\" href=\"https:\/\/openmv.io\/collections\/cameras\/products\/openmv-n6?variant=41573456576606\" target=\"_blank\"\u003eOpenMV N6\u003c\/a\u003e\u003c\/span\u003e. The OV5640 module is compatible with the \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca rel=\"noopener\" title=\"OpenMV Cam RT1062\" href=\"https:\/\/openmv.io\/collections\/cameras\/products\/openmv-cam-rt?variant=41434819919966\" target=\"_blank\"\u003eOpenMV Cam RT1062\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe Multispectral Thermal Camera Module allows your OpenMV Cam to interface with the FLIR® Lepton\u003cb\u003e®\u003c\/b\u003e 1\/2\/3 Thermal Imaging sensors for Thermal Vision applications and interface with the PAG7936 1MP 120 FPS Color Global Shutter or OV5640 5MP Color Rolling Shutter sensor at the same time. Now you can process thermal images mixed with color at the same time!\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca rel=\"noopener noreferrer\" title=\"Documentation\" href=\"https:\/\/docs.openmv.io\/openmvcam\/sensors\/pag7936.html\" target=\"_blank\"\u003eFor more information, about the PAG7936 version, see our documentation.\u003c\/a\u003e\u003cbr\u003e\u003ca rel=\"noopener noreferrer\" title=\"Documentation\" href=\"https:\/\/docs.openmv.io\/openmvcam\/sensors\/multispectral-thermal-ov5640.html\" target=\"_blank\"\u003eFor more information, about the OV5640 version, see our documentation.\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0803\/9211\/files\/hand-thermal-edited-2.gif?v=1742582360\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003cb\u003eThe actual FLIR® Lept\u003c\/b\u003e\u003cstrong\u003eon®\u003c\/strong\u003e\u003cb\u003e Camera Sensor is sold separately which you can buy at the \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"GroupGets Store\" href=\"https:\/\/store.groupgets.com\/collections\/flir-lepton-accessories\" target=\"_blank\"\u003eGroupGets Store\u003c\/a\u003e\u003c\/span\u003e.\u003c\/b\u003e \u003cem\u003eThe FLIR® Lepton\u003cb\u003e®\u003c\/b\u003e Camera Sensor modules are export controlled so it's difficult for anyone but GroupGets to sell them.\u003c\/em\u003e\u003c\/p\u003e","brand":"Kickstarter","offers":[{"title":"PAG7936 1MP Global Shutter (OpenMV N6 Only)","offer_id":41753792577630,"sku":"Multispetral-Thermal-Camera-Module","price":60.0,"currency_code":"USD","in_stock":true},{"title":"OV5640 5MP Rolling Shutter","offer_id":41753792610398,"sku":"Multispetral-Thermal-Camera-Module-OV5640","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0803\/9211\/files\/mtcm-populated-front.jpg?v=1742581807"},{"product_id":"ps5520-5mp-hdr-camera-module","title":"PS5520 5MP HDR Camera Module","description":"\u003cp style=\"text-align: justify;\"\u003eThis module is only compatible with the \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca rel=\"noopener\" title=\"OpenMV N6\" href=\"https:\/\/openmv.io\/collections\/cameras\/products\/openmv-n6?variant=41573456576606\" target=\"_blank\"\u003eOpenMV N6\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe PS5520 is a highly integrated CMOS image sensor that outputs 2592x1944 (5MP) pixels with a rolling shutter readout. It embedded new FinePixel™ and HDR sensor technology to perform excellent image quality and single-shot high dynamic range synthesized image output.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/docs.openmv.io\/openmvcam\/sensors\/ps5520.html\" title=\"Documentation\" rel=\"noopener\" target=\"_blank\"\u003eFor more information, see our documentation.\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Kickstarter","offers":[{"title":"Default Title","offer_id":41590704996446,"sku":"OMV-MOD-HDR-V1","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0803\/9211\/files\/ps5520-hero.jpg?v=1743213375"},{"product_id":"ps5520-5mp-hdr-camera-module-25-00-add-on","title":"PS5520 5MP HDR Camera Module - 25.00 add-on","description":"\u003cp style=\"text-align: justify;\"\u003eThis module is only compatible with the \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/openmv.io\/collections\/cameras\/products\/openmv-n6?variant=41573456576606\" title=\"OpenMV N6\" rel=\"noopener\" target=\"_blank\"\u003eOpenMV N6\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe PS5520 is a highly integrated CMOS image sensor that outputs 2592x1944 (5MP) pixels with a rolling shutter readout. It embedded new FinePixel™ and HDR sensor technology to perform excellent image quality and single-shot high dynamic range synthesized image output.\u003c\/p\u003e","brand":"Kickstarter","offers":[{"title":"Default Title","offer_id":42479121399902,"sku":"OMV-MOD-HDR-V1","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0803\/9211\/files\/ps5520-hero.jpg?v=1743213375"},{"product_id":"multispectral-thermal-camera-module-30-00-add-on","title":"Multispectral Thermal Camera Module - 30.00 add-on","description":"\u003cp style=\"text-align: justify;\"\u003eThe PAG7936 module is only compatible with the \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/openmv.io\/collections\/cameras\/products\/openmv-n6?variant=41573456576606\" title=\"OpenMV N6\" rel=\"noopener\" target=\"_blank\"\u003eOpenMV N6\u003c\/a\u003e\u003c\/span\u003e. The OV5640 module is compatible with the \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/openmv.io\/collections\/cameras\/products\/openmv-cam-rt?variant=41434819919966\" title=\"OpenMV Cam RT1062\" rel=\"noopener\" target=\"_blank\"\u003eOpenMV Cam RT1062\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe Multispectral Thermal Camera Module allows your OpenMV Cam to interface with the FLIR® Lepton\u003cb\u003e®\u003c\/b\u003e 1\/2\/3 Thermal Imaging sensors for Thermal Vision applications and interface with the PAG7936 1MP 120 FPS Color Global Shutter or OV5640 5MP Color Rolling Shutter sensor at the same time. Now you can process thermal images mixed with color at the same time!\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0803\/9211\/files\/hand-thermal-edited-2.gif?v=1742582360\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003cb\u003eThe actual FLIR® Lept\u003c\/b\u003e\u003cstrong\u003eon®\u003c\/strong\u003e\u003cb\u003e Camera Sensor is sold separately which you can buy at the \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/store.groupgets.com\/collections\/flir-lepton-accessories\" title=\"GroupGets Store\" target=\"_blank\"\u003eGroupGets Store\u003c\/a\u003e\u003c\/span\u003e.\u003c\/b\u003e \u003cem\u003eThe FLIR® Lepton\u003cb\u003e®\u003c\/b\u003e Camera Sensor modules are export controlled so it's difficult for anyone but GroupGets to sell them.\u003c\/em\u003e\u003c\/p\u003e","brand":"Kickstarter","offers":[{"title":"PAG7936 1MP Global Shutter (OpenMV N6 Only)","offer_id":42479122481246,"sku":"Multispetral-Thermal-Camera-Module","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0803\/9211\/files\/mtcm-populated-front.jpg?v=1742581807"},{"product_id":"multispectral-thermal-camera-module-30-00-add-on-1","title":"Multispectral Thermal Camera Module - 30.00 add-on","description":"\u003cp style=\"text-align: justify;\"\u003eThe PAG7936 module is only compatible with the \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/openmv.io\/collections\/cameras\/products\/openmv-n6?variant=41573456576606\" title=\"OpenMV N6\" rel=\"noopener\" target=\"_blank\"\u003eOpenMV N6\u003c\/a\u003e\u003c\/span\u003e. The OV5640 module is compatible with the \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/openmv.io\/collections\/cameras\/products\/openmv-cam-rt?variant=41434819919966\" title=\"OpenMV Cam RT1062\" rel=\"noopener\" target=\"_blank\"\u003eOpenMV Cam RT1062\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe Multispectral Thermal Camera Module allows your OpenMV Cam to interface with the FLIR® Lepton\u003cb\u003e®\u003c\/b\u003e 1\/2\/3 Thermal Imaging sensors for Thermal Vision applications and interface with the PAG7936 1MP 120 FPS Color Global Shutter or OV5640 5MP Color Rolling Shutter sensor at the same time. Now you can process thermal images mixed with color at the same time!\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0803\/9211\/files\/hand-thermal-edited-2.gif?v=1742582360\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003cb\u003eThe actual FLIR® Lept\u003c\/b\u003e\u003cstrong\u003eon®\u003c\/strong\u003e\u003cb\u003e Camera Sensor is sold separately which you can buy at the \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/store.groupgets.com\/collections\/flir-lepton-accessories\" title=\"GroupGets Store\" target=\"_blank\"\u003eGroupGets Store\u003c\/a\u003e\u003c\/span\u003e.\u003c\/b\u003e \u003cem\u003eThe FLIR® Lepton\u003cb\u003e®\u003c\/b\u003e Camera Sensor modules are export controlled so it's difficult for anyone but GroupGets to sell them.\u003c\/em\u003e\u003c\/p\u003e","brand":"Kickstarter","offers":[{"title":"PAG7936 1MP Global Shutter (OpenMV N6 Only)","offer_id":42479122776158,"sku":"Multispetral-Thermal-Camera-Module","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0803\/9211\/files\/mtcm-populated-front.jpg?v=1742581807"},{"product_id":"ae3-oled-breakout-50-00-add-on","title":"AE3 OLED Breakout - 50.00 add-on","description":"\u003cp style=\"text-align: justify;\"\u003eThe AE3 OLED Breakout gives you full access to your OpenMV AE3! It has the following features onboard:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA 128x128 RGB OLED screen.\u003c\/li\u003e\n\u003cli\u003eA joystick with a center push button.\u003c\/li\u003e\n\u003cli\u003eTwo QWIIC Connectors.\u003c\/li\u003e\n\u003cli\u003eAll 10 GPIO Pins at 3.3V.\u003c\/li\u003e\n\u003cli\u003eFour ground hooks.\u003c\/li\u003e\n\u003cli\u003eAn ARM 10-pin JTAG header for SWD debugging.\u003c\/li\u003e\n\u003cli\u003eA reset button.\u003c\/li\u003e\n\u003cli\u003eAnd recovery switch to access the onboard secure enclave UART.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: justify;\"\u003eAdditionally, the onboard OLED can be disabled and electrically disconnected via an onboard switch.\u003c\/p\u003e","brand":"Kickstarter","offers":[{"title":"Default Title","offer_id":42479123071070,"sku":"OMV-AE3-OLED-BREAKOUT","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0803\/9211\/files\/ae3-oled-breakout-hero.jpg?v=1770070667"},{"product_id":"openmv-ae3-80-00-reward","title":"OpenMV AE3 - 80.00 reward","description":"\u003cp style=\"text-align: justify;\"\u003eThe OpenMV AE3 is a small, low power, microcontroller board which allows you to easily implement applications using machine vision in the real-world. You program the OpenMV AE3 in high level Python scripts (courtesy of the \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"http:\/\/micropython.org\/\" title=\"MicroPython\" target=\"_blank\"\u003eMicroPython\u003c\/a\u003e\u003c\/span\u003e Operating System) instead of C\/C++. This makes it easier to deal with the complex outputs of machine vision algorithms and working with high level data structures. But, you still have total control over your OpenMV AE3 and its I\/O pins in Python. You can easily trigger taking pictures and video on external events or execute machine vision algorithms to figure out how to control your I\/O pins.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe OpenMV AE3 is our small powerhouse and features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: justify;\"\u003eThe \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"Ensemble E3 Series\" href=\"https:\/\/alifsemi.com\/ensemble-e3-series\/\" target=\"_blank\"\u003eAlif Ensemble E3\u003c\/a\u003e\u003c\/span\u003e Dual ARM Cortex-M55 vector accelerated processors capable of up to 8 operations per clock running at 400 MHz (3.2 gigaops) and 160 MHz (1.28 gigaops) with 13.5MB of SRAM, 5.5MB of onchip MRAM (new type of FLASH) for program execution, and 32 MB of storage FLASH. The processor features dual 400 MHz and 160 MHz NPUs offering \u003cstrong\u003e204 Gigaops and 46 Gigaops of AI\/ML compute for running models - allowing you to run YOLO object detection algorithms onboard at 30 FPS and perform sentence recognition (for example) at the same time\u003c\/strong\u003e, and GPU for graphics acceleration that can accelerate image scaling. All I\/O pins output 3.3V and are 3.3V tolerant. The processor has the following I\/O interfaces:\n\u003cul\u003e\n\u003cli\u003eA 120 FPS 1MP Color Global Shutter image sensor. Most simple algorithms will run about 60 FPS on VGA (640x480) resolutions and below. If you want to use more specialized lenses with your image sensor, you can easily buy and attach them yourself. \u003c\/li\u003e\n\u003cli\u003eA high speed USB-C (480Mbs) interface to your computer. Your OpenMV Cam will appear as a Virtual COM Port and a USB Flash Drive when plugged in.\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eWith EMI Filtering and TVS protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eA SPI buses that can run up to 50Mb\/s allowing you to easily stream image data off the system to either the LCD Shield or another microcontroller.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo I2C Buses (up to 1Mb\/s), an I3C Bus (up to 10 Mb\/s), a CAN Bus (up to 8Mb\/s), and four Asynchronous Serial Buses (TX\/RX) for interfacing with other microcontrollers and sensors.\u003c\/li\u003e\n\u003cli\u003eTwo 12-bit ADCs (1.8V Tolerant).\u003c\/li\u003e\n\u003cli\u003eInterrupts on all I\/O pins (there are 10 I\/O pins on the board).\u003c\/li\u003e\n\u003cli\u003eAn onboard RTC that keeps running when the system is in low-power mode.\n\u003cul\u003e\n\u003cli\u003eWith 4KB of Backup RAM.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eA user controllable\/dimmable RGB LED.\u003c\/li\u003e\n\u003cli\u003eA user button.\u003c\/li\u003e\n\u003cli\u003eQWIIC Connector for easy electronic integration.\u003c\/li\u003e\n\u003cli\u003eA B2B Header for easy electronic integration.\u003c\/li\u003e\n\u003cli\u003e32 MB of program\/storage octal flash clocked at 100 MHz in 8-bit\u003cspan\u003e D\u003c\/span\u003eDR mode for 200\u003cspan\u003e \u003c\/span\u003eMB\/s of bandwidth (read speed).\u003c\/li\u003e\n\u003cli\u003eAn IMU (Accelerometer and Gyroscope) centered underneath the camera module.\u003c\/li\u003e\n\u003cli\u003eA Mic for recording audio and sound detection\/processing.\u003c\/li\u003e\n\u003cli\u003eA 8x8 Time-of-flight (ToF) sensor capable of detecting objects up to 4 meters away.\u003c\/li\u003e\n\u003cli\u003eOnboard WiFi (a\/b\/g\/n - 11\/54\/65 Mb\/s) and Bluetooth (v5.1 - BR\/EDR\/BLE) module with a chip antenna.\n\u003cul\u003e\n\u003cli\u003eOption to use a U.FL antenna instead.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eA 6-pin SWD Edge Connect Header Compatible with SEGGER J-Link Devices for debugging and programming.\n\u003cul\u003e\n\u003cli style=\"text-align: justify;\"\u003eWith EMI Filtering and TVS protection.\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eRecovery switch for debugging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eFour M1.6 mounting holes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: justify;\"\u003eFor more information about the OpenMV AE3, please see our \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"Documentation\" href=\"http:\/\/docs.openmv.io\/\" target=\"_blank\"\u003edocumentation\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"Kickstarter","offers":[{"title":"Default Title","offer_id":42479123857502,"sku":"OMV-AE3-V1","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0803\/9211\/files\/ae3-hero-v6.jpg?v=1767845205"}],"url":"https:\/\/openmv.io\/collections\/openmv-ae3-us.oembed","provider":"OpenMV","version":"1.0","type":"link"}